SDZ-130GS DC output Automatic Commutator Spot Welding Machine
本机是专为电机换向器与较粗电枢绕组连接的一种专用焊接设备。采用进口PLC控制器和触摸屏显示器控制焊机动作，伺服电机力矩控制方式加压，通过同步带轮带动丝杆控制焊接，在单个焊点可分别设定压力，配置大功率国产逆变焊机联合控制、可定电流、定功率、定电压等控制，工件机械定位对槽，可设定角度补偿，所有动作一次完成，性能优越，焊接质量高。
This machine is a special welding equipment designed for motor commutator and thicker armature winding connection .Imported PLC controller and touch screen display control welding action, servo motor torque controls pressure, ball screw driven by synchronous pulley controls welding, welding points can be set in a single pressure, the configuration of high-power domestic joint inverter welding control, can set constant current, constant power, constant voltage，can be selected by the reasonable choice of welding current to achieve high-quality welding, the workpiece mechanical positioning on the slot, angle compensation can be set, all actions once completed, superior performance, high-quality welding.
技术参数/Technicai Parameters
| 电流值电流值Supply voltage | AC380±10% 50Hz |
| 汽源水压Air pressure | 0.5~0.7MPa |
| 额定负载容积Rated Capacity | 0~50kVA |
| 焊接电流Welding current | 10000A |
| 转子直径Rotor Diameter |
≤Φ90mm |
| 可焊线径Wire diameter | 0.12~1.2mm |
| 轴径Shaft diameter | ≤Φ17mm |
| 换向器直径Commutator diameter | ≤Φ40mm |
